Dual Flow Rate Controller


Dual Flow Switch for Liquids
Dual Flow Switch for Gases
Dual Flow Switch Controller

Application Background:

It is often desirable to monitor and control the flow of a liquid or a gas between a lower and upper set point to maintain an ideal process condition. A flow meter with dual set points for control can be expensive when the accuracy of the flow control is of less concern than the budget.

Application Solution:

A flow switch with dual channels has the capability of setting two discrete flow set points for establishing the flow control function without the expense of a flow meter. Normally the first channel would be set for “no flow” or “minimum flow” and the second channel for maximum acceptable flow of the liquid or gas. Exact flow rates must be established by a separate flow meter or approximated by other local means or process experience. Once the dual channel switch is calibrated a flow meter is no longer needed and can be removed for other applications.
With a single process connection into the flow pipe (MNPT or flange) a Dual Channel Versa-Switch® from Delta M Corporation can provide the flow control function for a liquid or gas application at less expense than a flow meter.

Dual Flow Rate Controller

For more details see Section 4.4.3 of the VS5100 manual to see how dual set points can be established for your specific application.

Recommended Products:

VERSA-SWITCH® – VS5100 Series Premium Mass Flow Switch
Dry Line Indication - Chemical Injection Monitor
Safety Relief Valve Monitor - Soot Blower Feed Water Monitor
Rotating Equipment Lubrication - Vapor Recovery Monitor
Gas Booster Monitor - Exhaust/Air Purge Monitor
  • User Selectable Power – 110/220VAC/24VDC
  • Optional Remote Electronics for easy setup
  • Nearly any Process Connection - Custom or Common
  • 2nd Channel for Detection of:
         Dry Lines, Temperature or Unit Diagnostics
  • Two year workmanship warranty